Key Takeaways
- GRI reports a company's impact on people and the planet for a broad group of stakeholders.
- SASB gives industry-specific metrics that matter to investors.
- ISSB, through IFRS S1 and S2, is the global investor baseline.
- No federal rule requires any of the three.
- If you keep OSHA 300 and 300A logs, you already have most of the raw data all three standards ask for.
- GRI vs SASB vs ISSB: The Short Answer
- GRI Standards: Reporting Your Impact on the World
- Universal, Sector and Topic Standards
- Who sets GRI
- SASB Standards: 77 Industries, Investor Focus
- Is SASB being replaced by ISSB?
- ISSB Standards (IFRS S1 and S2): The Global Investor Baseline
- What happened to TCFD
- How many countries use ISSB
- Single vs Double Materiality in Plain English
- How the Three Standards Fit Together
- Are These ESG Reporting Standards Mandatory in the US?
- Where Workplace Safety Data Fits in GRI, SASB and ISSB
- Which Standard Should Your Company Use?
- FAQ
- Conclusion
Three acronyms dominate sustainability reporting, and one of them now owns another. That's the first thing most people get wrong about GRI vs SASB vs ISSB: they aren't three competing rulebooks. This guide explains what each standard measures, who sets it, how the three fit together, and where your OSHA injury data ends up in each one.
Last reviewed: November 2026
GRI vs SASB vs ISSB: The Short Answer
GRI reports a company's impact on people and the planet for a broad group of stakeholders. SASB gives industry-specific metrics that matter to investors. ISSB, through IFRS S1 and S2, is the global investor baseline. It builds on SASB, and the IFRS Foundation runs both.
| GRI Standards | SASB Standards | ISSB Standards (IFRS S1 and S2) | |
|---|---|---|---|
| Set by | Global Sustainability Standards Board (GSSB) | ISSB, under the IFRS Foundation | ISSB, under the IFRS Foundation |
| Main audience | All stakeholders: communities, workers, NGOs, investors | Investors | Investors and capital markets |
| Materiality lens | Impact on the economy, environment and people | Financial: issues that affect enterprise value | Financial: issues that affect enterprise value |
| Structure | Universal, Sector and Topic Standards | 77 industry standards | General requirements (S1) plus climate (S2) |
| How widely used | 77% of the world's 250 largest companies (KPMG, 2024) | 56% of the world's 250 largest companies (KPMG, 2024) | 40+ jurisdictions using or moving to it (IFRS Foundation, 2026) |
| Required in the US? | No | No | No |
The adoption figures come from KPMG's 2024 Survey of Sustainability Reporting. It reviewed reports from 5,800 companies published between July 2023 and June 2024. GRI was also used by 71% of the largest 100 companies in each country surveyed, and SASB use among that group rose to 41% from 33% in 2022.
GRI Standards: Reporting Your Impact on the World
GRI asks a simple question: how does your company affect the world around it? That covers emissions, wages, community impacts, and the health and safety of the people who work for you. Because it looks outward, its readers include regulators, employees, local communities and advocacy groups, as well as investors.
Universal, Sector and Topic Standards
GRI is built in layers. Universal Standards apply to every reporter and set out how to report. Sector Standards flag the topics most likely to matter in a given industry. Topic Standards hold the actual disclosures, such as GRI 403 for occupational health and safety and GRI 102 for climate change.
You pick the topics that are material to your impacts and report the matching Topic Standard disclosures. A trucking firm and a software company will end up with very different reports.
Who sets GRI
The Global Sustainability Standards Board (GSSB) writes the standards. It's an independent body within GRI, and it has no connection to the IFRS Foundation. GRI is free to use, which helps explain why mid-sized US companies often start there.
SASB Standards: 77 Industries, Investor Focus
SASB flips GRI's question around. Instead of your impact on the world, it asks which sustainability issues are likely to affect your company's financial performance. The answer depends heavily on industry, so SASB is split into 77 industry standards across 11 sectors, according to the IFRS Foundation.
Each industry standard lists a handful of disclosure topics with specific metrics. A bank reports on data security and lending practices. An engineering and construction firm reports on workforce health and safety, business ethics and bidding integrity.
Is SASB being replaced by ISSB?
No. It was absorbed rather than replaced. The Value Reporting Foundation, which held the SASB Standards, merged into the IFRS Foundation in 2022, and the ISSB now maintains SASB. Under IFRS S1, companies must refer to the SASB Standards and consider whether they apply. That makes SASB the industry detail layer underneath the ISSB.
The ISSB is also revising SASB. In July 2025, it proposed a comprehensive review of nine priority industries and targeted amendments to the others. Check the current version of your industry's standard before you build a reporting process around it.
ISSB Standards (IFRS S1 and S2): The Global Investor Baseline
The International Sustainability Standards Board was set up by the IFRS Foundation, the same foundation behind the IFRS accounting standards used in many countries. It has issued two standards so far:
- IFRS S1 covers general requirements for disclosing sustainability-related risks and opportunities that could affect a company's prospects.
- IFRS S2 covers climate-related disclosures, including Scope 1, 2, and 3 greenhouse gas emissions.
What happened to TCFD
The Task Force on Climate-related Financial Disclosures has wound down. Its recommendations live on inside IFRS S2, and the IFRS Foundation took over the job of monitoring company progress on climate disclosure. If your company reported to TCFD in the past, IFRS S2 is the natural next step.
How many countries use ISSB
In an April 2026 update, the IFRS Foundation said more than 40 jurisdictions had decided to use the ISSB Standards or were taking steps to bring them into law or regulation. That list includes Brazil, Canada, Japan, Australia, Singapore and the UK. Trackers publish different totals because some count only completed adoptions. Always check which definition a number uses.
The United States isn't on that list. No federal rule requires US companies to report under ISSB.
Single vs Double Materiality in Plain English
Materiality decides what goes into a report, and it's the clearest dividing line between the three standards.
- Financial materiality (SASB and ISSB): report an issue if it could reasonably affect investors' decisions about your company.
- Impact materiality (GRI): report an issue if your company significantly affects people or the environment, whether or not it hurts your finances.
- Double materiality combines both lenses. The EU's sustainability reporting rules use this approach, which is why GRI fits more naturally there.
Example: Say a warehouse operator has a high rate of back injuries. Under GRI, it reports because workers are harmed. Under SASB, it reports if injuries drive turnover, insurance costs, or contract losses that investors care about. Most real safety problems meet both tests.
How the Three Standards Fit Together
The bodies behind these standards have spent the last few years making them work together rather than compete. Two links matter most:
- 1. ISSB and SASB: IFRS S1 directs companies to the SASB Standards for industry metrics. Use ISSB as the framework and SASB as the detail.
- 2. ISSB and GRI: In June 2025, GRI's standard-setting board granted equivalence between IFRS S2 and the new GRI 102 Climate Change standard on greenhouse gas figures. Companies reporting under both can use their IFRS S2 Scope 1, 2, and 3 disclosures to meet GRI 102, provided emissions are measured under the GHG Protocol Corporate Standard.
The practical result is a building-block model. Many large companies publish a GRI report for stakeholders and an ISSB- or SASB-based disclosure for investors, both drawing on the same data.
Many companies publish one report for stakeholders and another for investors, both built from the same data.
Are These ESG Reporting Standards Mandatory in the US?
No federal rule requires any of the three. The SEC's 2024 climate disclosure rule has been stayed, and the agency has moved to rescind it, as reported by Jones Day in September 2026. California is the main exception. Its SB 253 law requires large companies doing business in the state to report Scope 1 and 2 emissions. Its SB 261 climate risk law is on hold while a court appeal continues.
In practice, most US companies report voluntarily, because investors, lenders, and big customers ask. Many large buyers send supplier questionnaires that reference these frameworks. For the full picture of US rules, deadlines, and costs, see our ESG reporting beginner guide.
Where Workplace Safety Data Fits in GRI, SASB and ISSB
Here's where an EHS team holds an advantage. If you keep OSHA 300 and 300A logs, you already have most of the raw data all three standards ask for. The table below maps each record to its home.
| What you already track | GRI 403-9 (work-related injuries) | SASB, e.g. Engineering & Construction Services (IF-EN-320a.1) | ISSB |
|---|---|---|---|
| Recordable cases from the OSHA 300 log | Number and rate of recordable work-related injuries | Total recordable incident rate (TRIR) | Reported through the applicable SASB industry metric under IFRS S1 |
| Fatalities | Number and rate of fatalities | Fatality rate | Same route as above |
| Total hours worked (from the OSHA 300A) | Hours worked and the basis for calculating rates | Used as the rate denominator | Same route as above |
| Contractor injuries | Ask whether workers outside your direct employment are covered | Reported separately for direct and contract employees | Same route as above |
Three practical points for safety managers:
- 1. The SASB construction standard ties straight back to OSHA. The Engineering & Construction Services standard says companies with an all-US workforce should calculate their rates the way OSHA Form 300 does.
- 2. Use the BLS formula for rates. The Bureau of Labor Statistics computes an incidence rate as recordable cases × 200,000 ÷ total hours worked. The 200,000 represents 100 full-time workers over a year. Seven cases over 400,000 hours gives a rate of 3.5.
- 3. Contractor data is often the gap. Your OSHA logs cover your own workforce, so SASB's separate contract-employee figure may need a new data feed from your contractors.
Recordable cases and hours worked from OSHA logs feed GRI 403-9 and SASB safety metrics.
GRI's dedicated safety standard, GRI 403: Occupational Health and Safety, runs from disclosure 403-1 to 403-10. It covers management systems, worker training, and ill health, not just injury counts. For the metrics behind these rates, our guide to HSE KPIs and performance metrics explains TRIR, DART and leading indicators in more depth.
Which Standard Should Your Company Use?
There's no single right answer. The best choice depends on who reads your report.
| Your situation | Sensible starting point | Why |
|---|---|---|
| Public company with institutional investors | ISSB frame with your SASB industry standard | Investors expect financially material, comparable metrics |
| Private company asked for supplier ESG data | SASB industry standard, plus GRI topics a customer asks for | Short, industry-relevant and widely recognized |
| Large company doing business in California | Greenhouse gas inventory under the GHG Protocol first | SB 253 is about emissions data, whichever framework you report in |
| Company with operations in the EU | GRI, alongside EU requirements | Double materiality lines up with GRI's impact lens |
| Company publishing its first sustainability report | GRI, starting with a few material topics | Free, flexible and stakeholder-friendly |
Whichever you choose, start with a materiality assessment and reuse the same data across frameworks. Our list of ESG metrics and KPIs shows which numbers usually make the cut.
The right standard depends on who reads your report: investors, customers or a wider group of stakeholders.
This guide explains published standards from GRI and the IFRS Foundation, and US rules as reported at the time of review, for general information. It isn't legal or accounting advice. Check current requirements with the standard-setters, the SEC, the California Air Resources Board, or a qualified advisor.
FAQ
Yes. Many large companies do. GRI and the IFRS Foundation have worked on interoperability, and GRI 102 accepts IFRS S2 greenhouse gas disclosures as equivalent when they're measured under the GHG Protocol.
Yes. The ISSB maintains the SASB Standards, and IFRS S1 requires companies to consider them. SASB supplies the industry-specific metrics that the ISSB framework relies on.
No. No federal rule requires ISSB reporting. Some US companies report under it voluntarily, or because they operate in countries that have adopted it.
GRI 403 is the most detailed, covering management systems as well as injury data. SASB includes safety metrics such as TRIR only in industries where safety is financially material.
In effect, yes. The TCFD has wound down; its recommendations are built into IFRS S2, and the IFRS Foundation now monitors climate disclosure progress.
Conclusion
The GRI vs SASB vs ISSB question has a simpler answer than the acronyms suggest:
- GRI tells stakeholders how you affect the world.
- SASB gives investors industry metrics.
- ISSB wraps SASB into a global investor baseline.
They're built to work together, and your OSHA logs already feed all three. Start with your readers, and the right standard usually becomes clear.
Published by OSHA Workplace Safety
Has your company been asked for ESG safety data by a customer or investor? Share which framework they named in the comments, and pass this guide to your sustainability or finance team.
Explore More ESG Guides